The Far Northwest Side is the part of Chicago that looks most like the suburbs we work in every day: brick bungalows, Cape Cods, Georgians and Tudors on tree-lined blocks, most of them owner-occupied. It sits just over the line from Park Ridge and Niles, a short drive from our Mount Prospect base, and our records show 44 completed jobs here.
We are a suburban roofer by design. We do not chase work across the whole city, because long drives and a steady diet of flat-roof two-flats are not what our crews do best. The Far Northwest Side is the exception, and for good reason: the housing is single-family, the roofs are pitched, and the neighborhoods border the suburbs we already serve. Edison Park and Norwood Park run into Park Ridge; Edgebrook and Sauganash sit against the forest preserves next to Lincolnwood and Niles.
It is also a part of the city we know well. Our job records show 44 completed projects in the four ZIP codes this page covers, most of them full roof replacements, many with new gutters, flat-roof sections over porches and garages, and chimney flashing. The Northwest Side has been home to much of Chicago's Polish-American community for generations, and our team speaks Polish, which a lot of our customers here prefer.
Working in the city takes paperwork the suburbs do not. We hold a City of Chicago General Contractor license (Class E, #TGC147129) alongside our Illinois Roofing Unlimited License #104.010248, pull the City permit for every replacement, and carry the insurance the City requires to keep that license active.
Most of those 44 jobs were full roof replacements, and the work also covered gutters, flat-roof sections and chimney work. That is local experience you can check: ask us for a reference near you, and read what customers say in our Google reviews.
Gutter, fascia and soffit work in Chicago's Norwood Park neighborhood, the second job we've done for this owner. Clean gutter run and new white fascia and soffit installed to replace worn material. Repeat-client work is the part of the business we care about most.
Chicago bungalows, Cape Cods, Georgians and raised ranches, with some much older frame homes in Norwood Park. The bungalows share the same weak points we see across the border in Park Ridge: original chimney flashing covered over with roofing cement, attic ventilation designed for a different era, and plank decking that needs checking board by board when the old roof comes off.
The highest-end housing on the Northwest Side: 1920s to 1950s brick Tudors, Colonials and Georgians, many with steep pitches and multiple gables, some with copper details. Mature trees and the forest preserves mean gutters clog fast and north-facing slopes stay damp. These are the homes where slate, cedar or a composite such as Brava or DaVinci comes up, and where flashing detail matters as much as the shingle.
Bungalow-belt blocks and post-war single-family homes, plus the commercial strips along Milwaukee and Northwest Highway. Most residential work here is a straightforward architectural-shingle replacement done properly: new flashing, correct ventilation, and the low-slope rear sections handled to Chicago's code rather than patched.
Commercial owners on Milwaukee Avenue and Northwest Highway: we handle flat and low-slope roofs too, including TPO and modified bitumen, under the same City license and permit process.
Yes, on the Far Northwest Side: Edison Park, Norwood Park, Edgebrook, Sauganash, Forest Glen, Jefferson Park, Gladstone Park and Wildwood. These neighborhoods are a short drive from our Mount Prospect base, and our job records show 44 completed projects here. We hold a City of Chicago General Contractor license (Class E, #TGC147129), which Chicago requires for roofing work in the city, in addition to our Illinois Roofing Unlimited License #104.010248.
Most residential roof replacements here run $15,000 to $40,000, with Chicago bungalows and Cape Cods toward the lower end and larger two-story Georgians and Tudors higher. Larger or more complex homes run $40,000 to $70,000. Slate, cedar and composite slate such as Brava or DaVinci are priced per project, because the roof size, pitch and detailing drive the number. Every estimate is written and itemized.
Yes. A roof replacement in Chicago needs a City permit, and the work has to be done by a contractor holding a City of Chicago General Contractor license. We pull the permit and schedule the inspections; you do not deal with the Department of Buildings yourself. Masonry work such as rebuilding a chimney crown is done by a City-licensed mason working under our project.
Yes. Chicago's energy code sets a reflectance standard for low-slope roofs, so a replacement flat section generally needs a reflective cap sheet or a white membrane rather than a standard dark granulated cap. We specify a compliant product on the estimate so the permit and inspection go through cleanly.
Tak. Our team speaks Polish and English, and many of our Northwest Side customers prefer to go through the estimate and the job in Polish. Our Polish-language pages are at leadersroof.com/polski.
Across the city line we also serve Park Ridge, Niles, Lincolnwood and Des Plaines.
Straight answers from thirty years of roofing in the area. Start with the one closest to your situation, or see all guides.
Free written estimates, in English or Polish. Call (708) 847-5418 or fill out the form.